Dadco Polyester DP-140
Dadco Polyester DP-140 Is a waterproofing oxidized membrane, reinforced with a high quality non-woven polyester mat.
Dadco Polyester DP-140 waterproofing membranes are manufactured from high performance membrane produced with a modified bitumen compound, then coated onto a dimensionally stable Polyester mat of 140 g/m² reinforcement, and the surface from both sides has a thermo fusible plastic film.
- Excellent bonding to surfaces.
- Easy to apply.
- Excellent resistance to salts and water-prone chemicals.
- Accommodates structural movements.
- Stability at high temperatures.
Dadco Polyester DP-140 membrane is ideal for a wide range of waterproofing applications such as roofs, basements, tunnels, car parks, wet areas (kitchens & bathrooms).
Application Tools Required:
Measuring tape, marking string, gloves, goggles, gas torch, knife, trowels.
Concrete surface should cleaned thoroughly of all contaminates like dust, traces and oils, then apply Dadco Primer D-41 on the surface by brush or roller and allow it to dry to promote the adhesion between the membrane and surface The rolls should be aligned correctly with an overlap of 10 cm at least from both sides. Using the gas torch, bond the sides of the roll by heating the overlap enough to obtain a high and excellent waterproofed surface.
- Roll length : 10 meters
- Roll width : 1 meter
- Roll thickness :4 mm
- Reinforcement: Polyester
Backing and Storage:
Dadco Polyester DP-140 is produced in rolls of 1 × 10 meters. Special lengths are available upon request. The rolls are palletized and shrink-wrapped. The rolls are kept vertically, and pallets should not be stacked on top of each other.
Health and Safety:
All safety measures should be taken during the application. Fire extinguishers should be available at the site. Workers should wear protective clothing during the application.
Technical Data Sheet:
|2||Reinforcement||g/m²||160 /POLYESTER||ASTM 5147/D5147m|
|3||Roll Gross weight||Kg||40-45||ASTM 5147/D5147m|
|4||Tensile strength, (MD)||Kn/m||19.29||ASTM 5147/D5147m|
|5||Tensile strength (XMD)||Kn/m||10.27||ASTM 5147/D5147m|
|6||Elongation at Break (MD)||%||53.44||ASTM 5147/D5147m|
|7||Elongation at Break (XMD)||%||60||ASTM 5147/D5147m|
|8||Tear Strength (MD)||N||750||ASTM 5147/D5147m|
|9||Tear Strength (XMD)||N||534||ASTM 5147/D5147m|
|10||Water Absorption||%||1.6||ASTM 5147/D5147m|
|11||Compound Stability||ºC||121||ASTM 5147/D5147m|
|12||Compound Stability||%||0.73||ASTM 5147/D5147m|
|13||Mass Per Unit Area||g/m²||4590||ASTM 5147/D5147m|
|14||Softening Point||ºC||151||ASTM D36|
|15||Bitumen Penetration||dmm||11||ASTM D5|
The data provided here is per our best of knowledge and experience; however, as the application environment and conditions are beyond our control, it is the user’s responsibility to observe the precautionary measures and practice within local regulations. Dadco reserves the right to make changes to the provided data without any prior notice.
Our Quality Policy
The Quality policy of Fast International Petrochemicals Co. Ltd. (Dadco) is to attain the highest standards of quality and to satisfy all requirements and needs of our clients considering that the internal implemented procedures ensure the conformity of its services and products to the contractual and agreed client’s requirements. To achieve the above mentioned goals, Fast International Petrochemicals Co. Ltd. (Dadco) is committed to work closely with our clients to ensure our products and services conform with their requirements.