MC-1

logo

description:

Cut back petroleum asphalt of the medium curing type for use in the construction and treatment of roads.

Storage and Shelf life:

Store the material in a shaded area, away from any source of heat. An un-opened sealed container has 12 months of shelf life.

Health and Safety:

DADCO MC-1 is a medium cured cutback petroleum. Wear suitable gloves, mask and goggles while handling and mixing. Avoid contact with the skin or eyes. 

Technical support:

Technical support is available for application, usage health and safety of the product. Please contact us if you need more information or assistance. 

Technical Data Sheet:

Properties Min Max Standard
FLASH POINT (TAG OPEN CUP) 0C 38 -- ASTM D-3143 / AASHTO T 48
KINEMATIC VISCOSITY AT 60 0C (Cst) 60 100 ASTM D-2170
DISTILLATION: (VOL % OF TOTAL)
DISTILLATE TO 360 0C) -- 20 ASTM D 402 /
AT 2250 C 20 60 AASHTO T 78
AT 2600 C 65 90
AT 3160 C 55 --
RESIDUE FROM DISTILLATION TO 3600 C
VOLUME % BY DIFFERENCE
TEST ON RESIDUE OF DISTILLATION :
PENETRATION AT 250 C 120 250 ASTM D5 / AASHTO
100 GM 5 SECS (DMM) T 49
DUCTILITY AT 250C 100 -- ASTM D113 /
50 MM / MIN (CM) AASHTO T 51
SPECIFICATIONS CONFORM WITH ASTM D 2027 / AASHTO M 82.

Disclaimer:

The data provided here is per our best of knowledge and experience; however, as the application environment and conditions are beyond our control, it is the user’s responsibility to observe the precautionary measures and practice within local regulations. DADCO reserves the right to make changes to the provided data without any prior notice.

Our Quality Policy

The Quality policy of Fast International Petrochemicals Co. Ltd. (Dadco) is to attain the highest standards of quality and to satisfy all requirements and needs of our clients considering that the internal implemented procedures ensure the conformity of its services and products to the contractual and agreed client’s requirements. To achieve the above mentioned goals, Fast International Petrochemicals Co. Ltd. (Dadco) is committed to work closely with our clients to ensure our products and services conform with their requirements.