Dadco RC-2

logo

Description:

Cut back petroleum asphalt of the medium curing type for use in the construction and treatment of roads.

Storage and Shelf life:

Store the material in a shaded area, away from any source of heat. An un-opened sealed container has 12 months of shelf life.

Health and Safety:

Dadco MC-1 is a medium cured cutback petroleum. Wear suitable gloves, mask and goggles while handling and mixing. Avoid contact with the skin or eyes. 

Technical support:

Technical support is available for application, usage health and safety of the product. Please contact us if you need more information or assistance. 

Technical Data Sheet:

Properties Min Max Standard
KINEMATIC VISCOSITY AT 60 0C (CST) 250 500 ASTM D-2170
FLASH POINT (TAG-OPEN CUP) © 27 - ASTM D-3143
DISTILLATE TEST :
DISTILLATE VOL. (%) OF -- -- ASTM D-402
TOTAL DISTILLATE TO 360 0C 35 -
TO 190 0C 60
TO 225 0C 80 --
TO 260 0C 65
TO 316 0C
RESIDUE FROM DISTILLATION TO 360 0C
PERCENT VOLUME BY DIFFERENCE ASTM D5 / AASHTO
TEST ON RESIDUE FROM DISTILLATION:
DUCTILITY AT 25 0C (cm) 100 -- ASTM D113 /
SOLUBILITY IN TRICHLOROETHYLENE (%) 99 - AASHTO T 51
PENETRATION AT 100 GM, 80 120 ASTM D-5
5 SECS AT 25 0C (dmm)
WATER (%) 0.2 ASTM D-95

Disclaimer:

The data provided here is per our best of knowledge and experience; however, as the application environment and conditions are beyond our control, it is the user’s responsibility to observe the precautionary measures and practice within local regulations. Dadco reserves the right to make changes to the provided data without any prior notice.

Our Quality Policy

The Quality policy of Fast International Petrochemicals Co. Ltd. (Dadco) is to attain the highest standards of quality and to satisfy all requirements and needs of our clients considering that the internal implemented procedures ensure the conformity of its services and products to the contractual and agreed client’s requirements. To achieve the above mentioned goals, Fast International Petrochemicals Co. Ltd. (Dadco) is committed to work closely with our clients to ensure our products and services conform with their requirements.