Dadco Primer

logo

Introduction:

Dadco Primer (Fast Drying Primer)

Description:

 Dadco Primer is an excellent cold applied fast drying primer formulated with good bitumen adhesive properties and selected quick drying petroleum solvents.

Function:

Dadco Primer is a suitable primer for concrete walls, roofs, bricks and metal surfaces. This is a prime coating prior to the application of waterproofing membranes or liquid membrane Dadco Flex.

Application:

  • The surface to be primed must be clean, dry, and free from dust, dirt, grease, and oil. To be applied with a brush, rollers, squeegees and airless spray. No heating necessary.

General Data:

Coverage : Concrete and metal surfaces = 200-300 gms/m2.
Standard: Complies with ASTM D-41
Packaging: 16 Kg/pail.180 Kg/drum.

Storage and Shelf life:

Store the material in a shaded area, away from any source of heat. An un-opened sealed container has 8 months of shelf life. 

Health and Safety:

Dadco Primer is a bituminous product, so wear gloves, mask and goggles while handling and mixing. Avoid contact with the skin or eyes. 

Technical support:

Technical support is available for application, usage health and safety of the product. Please contact us if you need more information or assistance. 

Technical Data Sheet:

Properties Min Max Standard
SAYBOLT FUROL VISCOSITY AT 250c (Sec) 30 0.92 ASTM D-88
KINEMATIC VISCOSITY AT 600c (Cst) 25 145 ASTM D-2170
DISTILLATE VOL.% OF PRIMER
UPTO 2250c
UPTO 360 0c
Not Less Than 30
Not More Than 60
ASTM D-402
PENETRATION AT 250c
100 gm; 5 Sec (dmm)
20 50 ASTM D-5
SOLUBILITY IN TRICHLOROETHYLENE (%) 99 -- ASTM D-2042
APPLICATION Brush, spray or roller

Disclaimer:

The data provided here is per our best of knowledge and experience; however, as the application environment and conditions are beyond our control, it is the user’s responsibility to observe the precautionary measures and practice within local regulations. Dadco reserves the right to make changes to the provided data without any prior notice.

Our Quality Policy

The Quality policy of Fast International Petrochemicals Co. Ltd. (Dadco) is to attain the highest standards of quality and to satisfy all requirements and needs of our clients considering that the internal implemented procedures ensure the conformity of its services and products to the contractual and agreed client’s requirements. To achieve the above mentioned goals, Fast International Petrochemicals Co. Ltd. (Dadco) is committed to work closely with our clients to ensure our products and services conform with their requirements.